If you are looking for our St. Charles location
Click Here

Furnace & Heater Repair

Are you looking for reliable Chicago furnace repair and maintenance service? Call (773) 342-4338 today for quick, affordable service that is guaranteed to solve your problem every time. Click here to browse through our current discounts and coupons.

furnace and heater repair

One appliance it just doesn’t make sense to neglect is your furnace. You count on it to provide you with warmth and comfort throughout the winter, so it is important to do your part to keep it running smoothly. Having a furnace breakdown when it’s freezing outside is a frightening thought, so find a reputable service provider close to you and keep the number just in case you ever need it.

You can read through a list of reviews of our services from people in your area when you click here now.

When Repairs are Needed

For the average homeowner, trying to figure out efficiency ratings can be a little challenging. It’s usually easier to monitor your furnace’s performance to tell if there is something wrong. If you’re not getting enough heat from the furnace or if the temperatures you set aren’t being met, there likely needs to be a repair somewhere in the system. If you smell unusual odors, hear loud noises when the furnace is going or see your heating bills climbing for no real reason, then it’s time someone came in and had a closer look at your heating system.

When Repairs Turn to Replacement

If you have a furnace that is up over the age of 15 and has begun showing signs of wear and tear, you may need to think about having it replaced. When a furnace gets that old, it is probably no longer efficient, and the repairs will start to add up and become a sizable expense. Some experts say if the repair bill is up over $700, then a new furnace may be the best course of action.

What Happens During Maintenance?

Every homeowner is advised to maintain his or her furnace throughout its life, so it will run more efficiently and last longer. When you have scheduled furnace maintenance, the technician will come in and thoroughly inspect your system. If there are any areas that need repairs, he will fix them up and he will clean all the important components of the furnace, including changing the filter. Once all this is done, the furnace will run smoothly for the upcoming winter and the homeowner will usually realize some savings.

HOW ARE WE DIFFERENT?

What sets us apart from other HVAC companies?

  • We have been around since 1985, and have over 30 years of experience.
  • We serve over 200 towns throughout the Chicago area.
  • Our team is NATE and EPA certified, and comply with industry codes and standards.
  • We do not subcontract our work to third parties. Your technician is a full-time professional at TDH Mechanical, handpicked by Tim himself.
  • We have a team of loyal professionals, some of whom have been with us for several years. This results in dedicated experts who are interested in building long term relationships with our customers.
  • We are authorized Trane dealers and offer the Trane Satisfaction Guarantee.
  • Top notch, truly personalized service from start to finish. No matter the extent of the job.

There is no problem too small or overwhelming for our team to tackle. We treat each and every service call with the same level of urgency, whether it’s a new furnace installation or air duct cleaning. All of our technicians carry a customer-first mindset, allowing you to benefit from unparalleled workmanship and a close attention to detail. Our goal is the same as yours: to help you experience a truly comfortable home environment without unexpected interruptions from your heating and cooling system.

Get Your Free Quote

Fast, reliable, and quality results. Contact us for a free quote today.

Get Started

By submitting, you agree to receive text message communication from us per our Terms and Conditions and Privacy Policy, which state that we will never share your personal information or spam you.

Fixing Broken Furnaces in Chicago and Oak Park Since 1988

Are parts of your home unnaturally chilly? Is there something banging and groaning behind your walls in the middle of the night? Before you call the Ghostbusters, it might be a good idea to reach out to a local furnace repair company. These signs are often experienced by people with a heating problem. And, in most cases, they can be solved by an experienced HVAC technician. To learn more about furnaces and what it takes to fix them, read on.

Give us a call at (773) 342-4338 to schedule heating repair in the Oak Park and Chicago area.

Signs Your Furnace Has a Problem

There are times when something goes wrong in the heating process. Though this sometimes leads to an obvious problem—a complete furnace breakdown—this isn’t always the case. Much of the time, the signs you need to call a Chicago HVAC contractor are much more subtle. To prevent big problems from snowballing into larger ones, it’s important to be on the lookout for the following:

  • Weird Smells: When you first turn your furnace on for the year, you might notice a musty smell. This is typically dust burning off that settled over the months your furnace sat idle. This will dissipate as the unit operates and isn’t anything to be concerned about. If you notice an odor that suddenly appears or refuses to go away, however, it’s time to call a Chicago HVAC professional.
  • Odd Noises: Is your furnace banging or making some other kind of noise? This can be the result of numerous issues with the unit and is best diagnosed by a heating repair expert. Call (630) 200-5399 to schedule a furnace repair in Chicago and Oak Park .
  • More Service Calls: Every furnace in the Oak Park or Chicago area will have a part fail and need service in its life. In fact, one out of four people in the US will have an HVAC technician in their home each year. But if you’re making multiple calls in a heating season, it’s a sign you’ve been propping up a system that is aging out. Note that service calls don’t include preventative furnace maintenance visits.
  • Climbing Utility Bills: There are many reasons your electric or gas bills can rise. Cooler temperatures are an obvious reason. But, if your fuel usage suddenly increases dramatically, you probably should have our Chicago HVAC experts take a look. This increased cost often indicates a furnace that's being pushed past its limit.
  • Visual Rust: While some amount of rust is expected with age, excessive amounts—especially on the flue—can be a sign of improper venting. If a roof or plumbing leak is causing furnace corrosion, it’s not just an eyesore. It can be dangerous. If the system rusts through to the heat exchanger, your home could be contaminated with deadly carbon monoxide. So, if you notice an issue with furnace rust, give TDH Mechanical, Inc. a call.
  • Frequent Cycling: If your furnace is constantly flicking on and off, there’s something stopping the unit from working properly. Unfortunately, this can be difficult to diagnose due to a variety of potential causes. To get the problem located and fixed quickly, rely on our Chicago heating repair experts.
  • Start-Up Problems: Does your furnace not turn on when it drops below the indicated temperature on your thermostat? Are you hearing clicking noises on start-up? These issues often signal an upcoming furnace breakdown. So, if you ever notice them, reach out to TDH Mechanical, Inc. by phone or form.

Fortunately, no matter the scope or size of the problem, TDH Mechanical, Inc. can handle your furnace repair. Though we do most of our work in Lincolnwood, Oak Park, and Chicago, we are also well known and trusted throughout the surrounding areas.

The Top 5 Causes of Furnace Failure

It’s important that homeowners understand what parts of their furnace are most likely to fail. This can better prepare them to communicate with us about their heating problems. When fixing heating systems in Chicago, we often find the following culprits, some of which can save you a service call:

  1. Clogged Filters: When was the last time you swapped out your furnace filter? If the answer is more than a few weeks ago, it might be time to check it, especially if you have pets. When running, your heating system pulls in dust, dander, and dirt. This is kept out of the mechanical parts by your furnace filter. A clogged filter restricts airflow, making your heating system work harder. Replacing it not only helps efficiency, but also improves air quality.
  2. Bad Thermostats: Your thermostat is responsible for signaling your furnace when to turn off and on to maintain the set temperature. If it’s not working properly, you’ll struggle to get warm. For instances where the thermostat may be at fault, make sure its batteries are good, if it uses any. Also, double-check that it is set to HEAT with the run method on AUTO.
  3. Ignition Failure: Sometimes the pilot light or surface ignitor will fail and refuse to light the burners. If this happens your furnace won’t be able to heat the air, leaving you in the cold. To prevent this, have it checked and cleaned regularly by an Chicago-area HVAC professional. If it's the middle of winter, though, just give our Chicago HVAC contractors a call at (630) 200-5399 instead.
  4. Exhaust Blower Issues: The furnace exhaust blower is what takes the combustion gasses out of the heat exchanger and vents it safely outdoors. If this component fails, the furnace will cycle on and off or shut down. Regular inspections and maintenance visits can prevent this from happening.
  5. Blower Motor Failure: The blower motor is essentially what keeps the air moving around your home. Should this component fail, it doesn’t matter how efficient your furnace is, the hot air won’t be distributed around your home. The blower can fail from overheating or from it becoming clogged with debris. Have your ducts cleaned and your furnace tuned up to keep the blower working effectively.
  6. Bad Heat Exchanger: The heat exchanger is one of the most important components of a conventional furnace. It is the component that safely transfers heat from the flame into heated air that is circulated in the home. When the heat exchanger develops holes or cracks, replacing it can be quite expensive. Some people prefer to simply replace their furnace. An expert evaluating your system can best advise you. If the stress on your heat exchanger is due to excess cycling due to having too large of a furnace, only replacing the heat exchanger will result in the same problem developing again.

Trust Us to Tackle Your Furnace Problems in Chicago or Oak Park

When it comes to furnace repair in Chicago or Lincolnwood, we know you have plenty of HVAC companies to choose from. However, not all of them are equal.

When you need your furnace repaired or replaced, trust the experts at TDH Mechanical, Inc.! As our long list of happy customers shows, many of your neighbors already do! With 35 years of experience helping people in the Chicago area, we have the know-how necessary to fix your broken furnace or replace the old one. No matter what you need, our company has well-defined services and procedures to ensure the job's done right. In other words, when it comes to furnace repair, you can always count on TDH Mechanical, Inc. for quality products and workmanship. Contact us today to schedule your furnace repair in Chicago.

Serving the St. Charles Area
Monday - Friday: 8:00am - 5:00pm
Call Us Today for Service
Chicago Location
1623 W Montrose Ave
Chicago, IL 60613
773-342-4338
St Charles Location
606 Cedar St
St Charles, IL 60174
630-406-9082
Home   |   Email Us |
Get a Quote   |   Maintenance   |   Guarantees |
Employment   |   Reviews   |  
For AC repair in Chicago IL, we accept most major credit cards.